»  Tunze

»  Accessories

»  Eheim

»  Via Aqua

Back to Power Heads

Commercially available aquarium pumps produce an excessively high flow rate in the core area of the water jet and a much too low flow in the marginal areas.

These differences will lead to stress on the aquarium inhabitants, in particular on coral polyps. Whereas it is desirable to generate gentle parallel flow lines in the aquarium with lower flow rates and without a hard water jet. Like in nature and to the benefit of the animals, Turbelle stream pumps meets these requirements. The pump series from 6,000 to 20,000 l/h (1,585 to 5,283 US gal./h) cannot be used as filter pumps. The scope of delivery comprises a universal holder for horizontal and vertical glass panes or frames (up to 39 mm / 1.53 in.) with numerous mounting possibilities.

The speed of the Turbelle stream 6000, 6100 and 6200 can be controlled by a Singlecontroller or a Multicontroller; in addition, they have been provided with a fish care function in case of motor standstill.

For 800 to 3,000 l (211 to 792USgal.) aquariums
Flow rate: 5,000 to 20,000l/h (1,319 to 5,283USgal./h)
Wattage: max.62W , FishCare function in standstill.
Voltage / Frequency: 230V/50; 115V/60Hz
Cable length: 5m (196.8in.)
Dimensions: ø98 x 118mm (diam.3.85 x 4.64in.)
Outlet: ø63/59mm (diam.2.48/2.32 in.).

Quiet and easy to maintain.
Low motor heat, high efficiency.

*please note this may not be a stock item and might need to be ordered in