Back to Submersible Pumps
High Volume outputs, perfect for waterfalls, no matter what your aspirations are!
The Stingray range boasts flow rates from 3800 to 16500 litres per hour and with head heights of up to 7 meters they are ideal for powering the boldest of waterfalls and brooks.
Versatility, convenience and clever thinking are standard features with Stingray from Pond and all is backed by a 3 Year Guarantee for your peace of mind.
A filter pumps which considers other inhabitants of the pond
One concern often voiced with solids handling filter pumps is the safety of the wildlife in the pond. The Stingray design goes a long way to addressing these concerns. The pump inlet sits at the very front of the pump, yet the strainer is designed so that all water flow into the pump is from the top, sides and rear. The concentrated suction is to the front of the pump, where there is no water entry. This reduces the torrent created by the up to 15,000 litres per hour that are being pulled in by the impeller and hence greatly reduces the risk to weaker wildlife.
|
Multi Directional Outlet |
Strainer with leaf guards |
 |

|
|
The outlet of the Stingray is multi directional in every respect. This allows you to point the hose in any direction even across the pond floor. The efficient ball joint design minimises frictional resistance and maximes flow.
|
The ingenious design of the strainer minimises maintenance even further with the help of the leaf guards raised above the holes. This feature reduces the likelihood of leaves, which may settle on the strainer, blocking the inflow of water to the pump. Thus maximising water flow for longer periods between cleaning.
|
|
Carry Handle |
Impeller Housing |
 |
 |
|
Convenient carry handle makes removing the pump simple. The overall design of the pump strainer clip system means simple and fast disassembly is possible without the need for tools.
|
The impeller housing is simple to remove for those occasional instances when cleaning is required. The whole rotor and impeller assembly is also replaceable as you would expect on heavy duty long life pumps.
|
Key Features:
-
Suitable for submersed and dry sited installation making it ideal for gravity fed filter
-
Purpose designed filtration pump
-
Solids handling of up to 8mm
-
Asynchronous motor designed for long trouble free life
-
Wildlife friendly design due to diffused intake
-
Stylish design
-
Easy to install and maintain
-
Multi-directional outlet
-
Large strainer surface
Typical Submersible Installation
Stingray is designed to be submersed deep in water and feed either a pond filter of the conventional pump fed design or a pressurised filter like the Pond ClariTec
Gravity Fed Installation:
By removing the pump motor from the casing it is ideal for connection to an external filter. The threaded pump inlet allows for simple connection. Thread is 1 1/2" male.
|
Technical Information |
|
|
|
|
|
Model
|
Max Output L/hr
|
Max Lift Head
|
Power Consumption
|
Cable Length
|
|
4000
|
3800
|
2.0m
|
54W
|
10m
|
|
6000
|
6000
|
2.7m
|
70W
|
10m
|
|
7000
|
7000
|
3.0m
|
95W
|
10m
|
|
10000
|
10500
|
4.0m
|
110W
|
10m
|
|
12000
|
12500
|
4.5m
|
200W
|
10m
|
|
15000
|
14500
|
5.0m
|
250W
|
10m
|
|
17000
|
16500
|
7.0m
|
320W
|
10m
|
|